Rubber hoses are used more and more widely in industry and in everyday life. Orientflex summarises a few things that need to be taken into account when using rubber hoses in order to make them last longer.
1. The bending radius must not be too small
All our tubes have their standard bending radius. If the bending radius is less than the standard in the process of use.
Then it is easy to make petrol hoses, diesel hoses, hydraulic oil hoses, etc., all kinds of rubber oil hoses are in a long-term fatigue working condition. This leads to damage to the skeleton of the oil hose or due to overstretching.
2. reasonable choice of oil pipe varieties and specifications
In our daily life, when we buy oil pipe, the boss of the business will ask you to buy the oil pipe is to transport which kind of oil media. Because the oil pipe specifications are more models, there are 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, etc.. You can choose Orientflex with a full range of oil hose specifications. So it is also vital to choose the right type and size of oil hose.
3. Control the smooth pressure
Oil pipe in the use of the process of our transport pressure needs to be controlled smoothly, do not suddenly increase. If the sudden increase will damage the body of the tube to shorten the use of oil-resistant tube time.
4. Don’t drag the fuel line
It is inevitable that we will have temporary changes in the workplace at work. So we do not drag on the ground when carrying the oil pipeline to be off the ground. To avoid scratching the outer rubber layer of the oil pipeline.
These are the 4 points to note when using rubber fuel hoses as summarised by Orientflex. Make the oil hose last 5 years longer. We hope you will find them useful.