Rubber Heater Hose is suitable for delivering hot water in cooling systems. It's made from CR/NBR and the cover is weather, abrasion and oil resistant.
The hose is suitable for ethylene glycol solutions with EPDM lining. The high tensile strength textile reinforcement makes the working pressures up to 10 bar, with a safety factor of at least 3:1.
Rubber Heater Hose Characteristics
High quality
Heat, ozone and weather resistance
ISO/TS 16949: 2009 registered
Anti-freeze
| Item Code | ID | OD | WP | BP | |||
|---|---|---|---|---|---|---|---|
| inch | mm | mm | bar | psi | bar | psi | |
| SAEJ20R3-10 | 3/8 | 10 | 17 | 10 | 150 | 30 | 450 |
| SAEJ20R3-13 | 1/2 | 13 | 21 | 10 | 150 | 30 | 450 |
| SAEJ20R3-16 | 5/8 | 16 | 24 | 10 | 150 | 30 | 450 |
| SAEJ20R3-19 | 3/4 | 19 | 27 | 10 | 150 | 30 | 450 |
| SAEJ20R3-25 | 1 | 25 | 34 | 10 | 150 | 30 | 450 |
